Network Card User Manual

42
Move the DWL-610 and Access Point or Wireless router into the same
room and then test the wireless connection.
Change the channel of the Access Point.
Move devices within the line of sight
Check that the Network Connection for the wireless client is configured
properly. Select AP (Infrastructure) when connecting to an access point
and select Ad-Hoc mode when connecting without an access point. Double-
click on the WLAN icon in the taskbar > click on Configuration to change
the settings for the wireless adapter.
If Security is enabled, make sure that the correct encryption keys are
entered on both the DWL-610 and the access point. Double-click on the
WLAN icon in the taskbar > click Encryption. Check to see that the key
selected is set to the same key as other devices on the network.
n
n
n
n
n
Troubleshooting (continued)
7. How can I troubleshoot distance issues using the DWL-610.