Table of Contents Contents Package Contents ................................................................................ 6 Minimum System Requirements .............................................................. 6 Introduction ....................................................................................... 7 Features and Benefits ........................................................................... 8 Hardware Overview ......................................................................
Table of Contents Wireless ...................................................................................................... 24 Basic Wireless Settings .......................................................................... 24 Wireless Security Mode ............................................................................... 25 WEP ....................................................................................................... 25 WPA-Personal ..............................................
Table of Contents Mac Address Filters ..................................................................................... 37 Filter Settings ......................................................................................... 37 Add MAC Address .................................................................................. 37 MAC Address List .................................................................................. 37 Firewall .............................................................
Table of Contents Firmware Upgrade.................................................................................. 47 Firmware Upgrade Notification Options ................................................. 47 Dynamic DNS .............................................................................................. 48 Status................................................................................................................ 49 Device Info ........................................................
Package Contents Package Contents D-Link® DGL-4300 GamerLounge™ Gaming Router Detachable Antenna Cat5 Ethernet Cable Power Adapter (5.0V, 2.
Introduction Introduction The D-Link GamerLounge™ DGL-4300 High-Speed Wireless Gaming Router is an 802.11g highperformance, wireless router that supports high-speed wireless networking and is designed to provide maximum gaming performance. With top-notch maximum wireless signal rates of up to 108Mbps1 and Gigabit Ethernet support for 10/100/1000Mbps LAN connections, rest assured enough bandwidth is available for all your gaming needs.
Features and Benefits Features and Benefits Loaded with game-centric features boasting maximum flexibility for configuration and performance Designed for the Gamers Network GameFuel Priority powered platform delivers fully-loaded features boosting network efficiency and performance Enhanced wireless technology for optimal range and connectivity – up to 108Mbps1 High-Performance CPU – ideal for P2P applications and multiplayer interactivity Automatically prioritizes and intelligently
Hardware Overview Hardware Overview Connections All Ethernet Ports (WAN and LAN) are auto MDI/MDIX, meaning you can use either a straight-through or a crossover Ethernet cable. Antenna Connector for wireless antenna Receptor for the Power Adapter Auto MDI/MDIX LAN ports automatically sense the cable type when connecting to Ethernet-enabled computers. The Auto MDI/MDIX WAN port is the connection for the Ethernet cable to the Cable or DSL modem.
Hardware Overview LEDs LOCAL NETWORK LEDs A solid light indicates a connection to an Ethernet-enabled computer on ports 1-4. This LED blinks during data transmission WLAN LED This LED will blink to indicate activity on the wireless network POWER LED A solid light indicates a proper connection to the power supply WAN LED A solid light indicates connection on the WAN port. This LED blinks during data transmission 10 D-Link Systems, Inc.
Wireless Basics Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or on public access wireless networks. D-Link wireless products will allow you access to the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking brings. A WLAN is a cellular computer network that transmits and receives data with radio signals instead of wires.
Wireless Basics Standards-based Technology The DGL-4300 Wireless Broadband Router utilizes the new 802.11g standard. The IEEE 802.11g standard is an extension of the 802.11b standard. It increases the data rate up to 54Mbps within the 2.4GHz band, utilizing OFDM technology. This means that in most environments, within the specified range of this device, you will be able to transfer large files quickly or even watch a movie in MPEG format over your network without noticeable delays.
Using the Configuration Interface Using the Configuration Interface The Configuration Interface can be accessed from your Web browser. Open up your Web browser and type http://192.168.0.1 in the address field and press Enter. The Configuration Interface login screen will appear. By default, there is no password. Click on the Log In button to access the Configuration main screen. Basic The Basic settings tab contains the Setup Wizards, Internet connection, and network setting options.
Wireless Basics Internet Connection Setup Wizard The Internet Connection Setup Wizard will assist you with connecting your D-Link® Gaming Router to the Internet. The step by step guide will prompt you for the necessary information to get you connected. The Internet Connection Setup Wizard guides you through the following basic router setup steps: To begin, click on the Launch Internet Connection Setup Wizard button. The Welcome To The D-Link Setup Wizard screen appears, click Next to continue.
Wireless Basics Depending upon your Internet Service Provider or the type of connection you selected in the previous step, one of three screens will appear. If you are unsure of any of the information, please contact your Internet Service Provider (ISP) for details. DHCP Connection (Dynamic IP Address) requires you to enter the MAC address of the computer that was originally connected to your broadband modem.
Using the Configuration Interface Wireless Security Setup Wizard The Wireless Security Setup Wizard will assist you with setting up your wireless network. The step by step guide will ask you for the necessary information to secure your wireless network. The Wireless Security Setup Wizard guides you through the following steps: To begin, click on the Launch Wireless Security Setup Wizard button. The Welcome To The D-Link Wireless Security Setup Wizard screen appears, click Next to continue.
Using the Configuration Interface Depending upon your selection in Step 3, you will see one of the following screens. Step 4: Set Your Wireless Security Password prompts you to enter a wireless security password between 2 and 20 characters in length. If you selected Better security in step 3, this screen will appear providing you your pre-shared key information. If you selected Good security in step 3, this screen will appear providing you your WEP key information.
Using the Configuration Interface WAN The WAN section is where your Internet Connection mode is selected. Your Internet Service Provider (ISP) determines the type of connection that you use. Modes There are three connection modes to choose from as shown below. If you are unsure of your connection settings, contact your Internet Service Provider (ISP) and you can enter the necessary information on the QIG or print this page and write the settings for future reference. Primary DNS Server: _____._____._____.
Using the Configuration Interface Advanced The Advanced options apply to all WAN modes. MTU: The MTU (Maximum Transmission Unit) is a parameter that determines the largest packet size (in bytes) that the router will send to the WAN. If LAN devices send larger packets, the router will break them into smaller packets. Ideally, you should set this to match the MTU of the connection to your ISP. Typical values are 1500 bytes for an Ethernet connection and 1492 bytes for a PPPoE connection.
Using the Configuration Interface Static WAN Mode Used when your ISP provides you a set IP address that does not change. The IP information is manually entered in your IP configuration settings. IP Address: Input the IP Address provided from your router configuration settings, ISP or network administrator. Subnet Mask: Input the Subnet mask provided from your router configuration settings, ISP or network administrator.
Using the Configuration Interface PPPoE WAN Mode A method of connection that requires you to enter a Username and Password (provided by your Internet Service Provider) to gain access to the Internet. Username: The username that you use to login to your Internet connection. Password: Enter the password associated with your username. Verify Password: Service Name: Reconnect Mode: Retype the password for verification. If your ISP requires a service name, enter it here.
Using the Configuration Interface DHCP The DHCP section is where you configure the built-in DHCP Server to assign IP addresses to the computers and other devices on your local area network. DHCP Settings DHCP Server Enabled: Once your D-Link Router is properly configured and this option is enabled, the DHCP Server function will assign your network devices the necessary information to connect to the LAN and Internet.
Using the Configuration Interface Add Static DHCP Client Static DHCP Clients receive the same IP address all the time. This is almost the same as if a device has a static IP address except that it must still actually request an IP address from the D-Link Router. The D-Link Router will provide the device the same IP address all the time. Servers on your network should either use a static IP address or this option.
Using the Configuration Interface Wireless The wireless section is used to configure the wireless settings for your D-Link Router. Please note that changes made on this section may also need to be duplicated on your Wireless Client. Basic Wireless Settings Wireless Radio Enabled: This option turns off and on the wireless connection feature of the router. If this is not enabled, you cannot connect using a wireless network adapter.
Using the Configuration Interface Wireless Security Mode To protect your privacy, use the wireless security mode to configure the wireless security features. This device supports three wireless security modes including: WEP, WPA-Personal, and WPAEnterprise. WEP is the original wireless encryption standard. WPA provides a higher level of security. WPA-Personal does not require an authentication server. The WPA-Enterprise option does require a RADIUS authentication server.
Using the Configuration Interface WPA-Personal This option uses Wi-Fi Protected Access with a Pre-Shared Key (PSK). Pre-Shared Key: The key is entered as a pass-phrase of up to 63 characters in ASCII format at both ends of the wireless connection. The pass-phrase cannot be shorter than 8 characters. The pass-phrase is used to generate session keys that are unique for each wireless client. Cipher Type: The encryption algorithm used to secure the data communication.
Using the Configuration Interface Advanced The Advanced options allow you to configure a variety of advanced features including ports, application priority, Internet access, filters, and advanced wireless settings. Virtual Server The Virtual Server option gives Internet users access to services on your LAN. This feature is useful for hosting online services such as FTP, Web, or Game Servers.
Using the Configuration Interface Add/Edit Virtual Server Virtual Server Rule: IP Address: Protocol: Name of the virtual server, such as Web Server. The IP address of the system on your internal network that will provide the virtual service, such as 192.168.0.50. Select the protocol used by the service. Private Port: The port that will be used on your internal network. Public Port: The port that will be accessed from the Internet. Schedule: Select a schedule for when this rule is in effect.
Using the Configuration Interface Special Applications The Special Application section is used to open single or multiple ports on your router when the router senses data sent to the Internet on a ‘trigger’ port or port range. Special Applications rules apply to all computers on your internal network. Application Level Gateway (ALG) Configurations Here you can enable or disable ALG’s.
Using the Configuration Interface Add/Edit Special Applications Rule The Special Application section is used to open single or multiple ports on your router when the router senses data sent to the Internet on a “trigger” port or port range. Special Applications rules apply to all computers on your internal network.
Using the Configuration Interface Gaming The Gaming section is used to open multiple ports or a range of ports in your router and redirect data through those ports to a single PC on your network. This feature allows you to enter ports in various formats: Add/Edit Game Rule Rule Name: Give the Gaming Rule a name that is meaningful to you, such as Game Server. You can also select from a list of pre-defined rules for many popular games.
Using the Configuration Interface GameFuel™ The GameFuel™ option helps improve your network gaming performance by prioritizing applications. By default the GameFuel settings are disable and application priority is not automatically classified. GameFuel™ Setup Enable GameFuel: This option is disabled by default. Enable this option for better performance and experience with online games and other interactive applications, such as VoIP.
Using the Configuration Interface ™ Add/Edit GameFuel Rule Automatic classification should be adequate for most applications. GameFuel rules identify a specific message flow and assign priority to that flow. Name: Priority: Protocol: Create a name for the rule that is meaningful to you. The priority of the message flow is entered here. O receives the highest priority (most urgent) and 255 receives the lowest priority. The protocol used by the messages.
Using the Configuration Interface Routing Add/Edit Route Adds a new route to the IP routing table or edits an existing route. Enable: Destination IP: Specifies whether the entry will be enabled or disabled. The IP address or network that the packets will be attempting to access Note: 192.168.1.0 with a Netmask of 255.255.255.0 means traffic will be routed to the entire 192.168.1.x network.
Using the Configuration Interface Access Control The Access Control section allows you to control access in and out of your network. Use this feature as Parental Controls to only grant access to approved sites, limit web access based on time or dates, and/or block access from applications like P2P utilities or games. Enabled By default the Access Control feature is disabled.
Using the Configuration Interface Access Control Rules List This section shows the current Access Control rules. Any device that does not have a rule, cannot access the Internet. Entries can be modified by clicking on the paper and pencil icon. To delete an entry, click on the trash can icon. After you’ve completed all modifications or deletions, you must click the Save Settings button at the top of the page to save your changes. The router must reboot before new settings will take effect.
Using the Configuration Interface Mac Address Filters The MAC (Media Access Controller) Address filter section is used to control network access based on the MAC Address of the network adapter. A MAC address is a unique ID assigned by the manufacturer of a networking device. This feature can be configured to ALLOW or DENY network/ Internet access.
Using the Configuration Interface Firewall A firewall protects your network from the outside world. The D-Link Gaming Router offers a firewall type functionality. The SPI feature helps prevent cyber attacks. Sometimes you may want a computer exposed to the outside world for certain types of applications. If you choose to expose a computer, you cam enable DMZ. DMZ is short for Demilitarized Zone. This option will expose the chosen computer completely to the outside world.
Using the Configuration Interface Inbound Filters The Inbound Filters option is an advanced method of controlling data received from the Internet. With this feature you can configure inbound data filtering rules that control data based on IP Address, Protocol, and/or Port. The Inbound Filter option is best suited for custom applications.
Using the Configuration Interface Configuring an Inbound Filter Rule When the Rule List is empty or none of the rules are enabled, all inbound data that corresponds to a connection that originated from inside the router or which corresponds to a Virtual Server, Gaming, or Special Application Rule is ALLOWED by default. When rules are configured, the router compares incoming data packets against the rules in the list.
Using the Configuration Interface Advanced Wireless Advanced Wireless Settings Fragmentation Threshold: This setting should remain at its default setting of 3200. If you experience a high packet error rate, you may slightly adjust your “Fragmentation” value somewhere in the between the recommended range of 256 to 3200. Setting the Fragmentation value too low may result in poor performance. RTS Threshold: This setting should remain at its default setting of 3200.
Using the Configuration Interface Tools Admin The Admin option is used to set a password for access to the Web-based management. By default there is no password configured. It is highly recommended that you create a password to keep your new router secure. Password Password: Enter a password the will grant access to the Web-based management interface. Administration Gateway Name: Remote Management: Remote Management Server Port: Admin Idle Timeout: The name of the router can be changed here.
Using the Configuration Interface Time The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also be configured to automatically adjust the time when needed. Time Configuration Time Zone: Daylight Saving Enable: Daylight Saving Offset: Select your local time zone from pull down menu.
Using the Configuration Interface Schedules Schedules can be created for use with enforcing rules. For example, if you want to restrict web access to Mon-Fri from 3pm to 8pm. You could create a schedule selecting Mon, Tue, Wed, Thu, and Fri and enter a Start Time of 3pm and End Time of 8pm. Add/Edit Schedule Rule Schedule Name: Name the schedule, such as Weekday rule. Day(s): Place a checkmark in the boxes for the desired days or select the All Week radio button to select all seven days of the week.
Using the Configuration Interface Syslog This section allows you to archive your log files to a Syslog Server. Archive to Syslog: Syslog Server IP Address: Enable this option to output the router logs to a Syslog Server on your network. Enter the IP address of the Syslog Server. Tools > Syslog Email The Email feature can be used to send the system log files, router alert messages, and firmware update notification to your email address.
Using the Configuration Interface System The System Settings section allows you to reboot the device or restore the router to the factory default settings. Restoring the unit to the factory default settings will erase all settings including any rules that you’ve created. System Commands Tools > System Reboot the Device: This will restart the router. Useful for restarting when you are not near the device.
Using the Configuration Interface Firmware The Firmware Upgrade section can be used to update your router to the latest firmware code to improve functionality and performance. To check for the latest firmware, click the Check Online Now button. If you would like to be notified when new firmware is released, place a checkmark in the box next to Email Notification of Newer Firmware Version. Firmware Information This section displays the Current Firmware Version and the Latest Firmware Version.
Using the Configuration Interface Dynamic DNS The DDNS feature allows you to host a server (Web, FTP, Game Server, etc…) using a domain name that you have purchased (www.whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing) IP addresses. Using a DDNS service provider, your friends can enter in your domain name to connect to your server no matter what your IP address is.
Using the Configuration Interface Status The Status items are mainly informational. Device Info The Device Info page displays your Router settings. Options cannot be modified from this page. General Time: Firmware Version: Displays the time and date that the router is set to. Displays the currently loaded firmware version. WAN Connection Type: The Internet connection type that is being used. MAC Address: The MAC address that is seen over the Internet.
Using the Configuration Interface Wireless LAN Wireless Radio: MAC Address: Network Name (SSID): Channel: Turbo Mode: Security Type: Indicates whether wireless networking is on or off. The MAC address displayed for your wireless network. The Network Name, also referred to as SSID, of your wireless network. The channel being used by the router for broadcasting on the wireless network. Indicates whether Turbo Mode is enabled or disabled. Indicates the type of wireless security being used.
Using the Configuration Interface Logs The router automatically logs (records) events of possible interest in it’s internal memory. If there isn’t enough internal memory for all events, logs of older events are deleted but logs of the latest events are retained. The Logs option allows you to view the router logs. You can define what types of events you want to view and the level of the events to view.
Using the Configuration Interface LAN Statistics Sent: The number of packets transmitted to the local area network. Received: The number of packets received from the local area network. TX Packets Dropped: The number of transmit packets dropped on the local area network. RX Packets Dropped: The number of receive packets dropped on the local area network. Collisions: Errors: The number of collisions on the local area network. The number of errors occuring on the local area network.
Using the Configuration Interface Appendix Securing Your Network 1. Change Admin Password Changing the password to access your new router is the first step in securing your network. This can done through the Wizard or on the Admin Page of the Tools tab. There is no password by default and hackers will know this when trying to access your network. Make sure that the password you choose is not commonly known or something that is easy to guess such as your last name or your pet’s name.
Using the Configuration Interface 4. Changing the Wireless Network Name (SSID - used for wireless devices only) It is always a good idea to change the wireless network name (SSID) from the default value. Leaving it in the default state is usually a good indication to intruders that all settings (including security) are probably defaults. This setting identifies your wireless network. Make sure that the name you choose is not commonly known or something that is easy to guess.
Appendix Glossary A Access Control List - ACL. Database of network devices that are allowed to access resources on the network. Access Point - AP. Device that allows wireless clients to connect to it and access the network Ad-hoc network - Peer-to-Peer network between wireless clients Address Resolution Protocol - ARP. Used to map MAC addresses to IP addresses so that conversions can be made in both directions. ADSL - Asymmetric Digital Subscriber Line Advanced Encryption Standard - AES.
Appendix B Backward Compatible - The ability for new devices to communicate and interact with older legacy devices to guarantee interoperability Bandwidth - The maximum amount of bytes or bits per second that can be transmitted to and from a network device Basic Input/Output System – BIOS.
Appendix D Data – Information that has been translated into binary do that it can be processed or moved to another device Data Encryption Standard – Uses a randomly selected 56-bit key that must be known by both the sender and the receiver when information is exchanged Data-Link layer – The second layer of the OSI model. Controls the movement of data on the physical link of a network Database – Organizes information so that it can be managed updated, as well as easily accessed by users or applications.
Appendix Dynamic IP address – IP address that is assigned by a DHCP server and that may change. Cable Internet providers usually use this method to assign IP addresses to their customers.
Appendix Half-duplex – Data cannot be transmitted and received at the same time Hashing – Transforming a string of characters into a shorter string with a predefined length Hexadecimal – Characters 0-9 and A-F HomePNA – Networking over telephone lines HomeRF – Networking standard that combines 802.11b and DECT (Digital Enhanced Cordless Telecommunication) that provides speeds up to 1.
Appendix Intrusion Detection – A type of security that scans a network to detect attacks coming from inside and outside of the network IP – Internet Protocol IP address – A 32-bit number, when talking about Internet Protocol Version 4, that identifies each computer that transmits data on the Internet or on an Intranet IPsec – Internet Protocol Security IPv6 – Internet Protocol Version 6 uses 128-bit addresses and was developed to solve the problem that we face of running our of IP version 4 addresses IPX –
Appendix Megabyte - MB Megabits per second - Mbps MIB – Management Information Base is a set of objects that can be managed by using SNMP Modem – A device that Modulates digital signals from a computer to an analog signal in order to transmit the signal over phone lines.
Appendix P Password - A sequence of characters that is used to authenticate requests to resources on a network Personal Area Network – The interconnection of networking devices within a range of 10 meters Physical layer – The first layer of the OSI model.
Appendix S Samba – A freeware program that allows for resources to be shared on a network.
Appendix Unicast – Communication between a single sender and receiver Universal Plug and Play – A standard that allows network devices to discover each other and configure themselves to be a part of the network UPnP – Universal Plug and Play URL – Uniform Resource Locator is a unique address for files accessible on the Internet UTP – Unshielded Twisted Pair V Virtual LAN Virtual Private Network – A secure tunnel over the Internet to connect remote offices or users to their company’s network VLAN – Virtual
Appendix Technical Specifications Hardware Interface • 4 x 10/100/1000 Auto-Sensing Gigabit Ethernet LAN Ports • 1 x 10/100 Auto-Sensing Fast Ethernet WAN Port • D-Link 108G Wireless Technology Software Features • GameFuel™ Priority – Technology • Up to 256 Firewall Port Configurations • Access Control Policies (Parental Controls) • Internal and External System Logging • Static / Dynamic Routing • Oversized NAT table • Email Alerts • Wireless Distribution System (WDS) Dimensions • L = 7.5 inches (190.
Appendix External Antenna Type • 1 - 5dBi detachable antenna Standards • IEEE 802.11g • IEEE 802.11b • IEEE 802.3 • IEEE 802.3u LEDs • Power • WAN • WLAN (Wireless Connection) • LAN Wireless Signal Rates1 with Automatic Fallback • D-Link 108G: 108Mbps • 54Mbps · 48Mbps • 36Mbps · 24Mbps • 18Mbps · 12Mbps • 11Mbps · 9Mbps • 6Mbps · 5.5Mbps • 2Mbps · 1Mbps Power Input • External Power Supply DC 5V, 2.5A Warranty • 1-Year 1 Maximum wireless signal rate derived from IEEE Standard 802.11g specifications.
Appendix Contacting Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our web site, or by phone.
Appendix Warranty Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited warranty for its product only to the person or entity that originally purchased the product from: D-Link or its authorized reseller or distributor and Products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, addresses with an APO or FPO.
Appendix Non-Applicability of Warranty: The Limited Warranty provided hereunder for hardware and software of D-Link’s products will not be applied to and does not cover any refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case, the product is being sold “As-Is” without any warranty whatsoever including, without lim
Appendix Disclaimer of Other Warranties: EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO NINETY (90) DAYS.
Appendix For detailed warranty outside the United States, please contact corresponding local D-Link office. FCC Caution: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment; such modifications could void the user’s authority to operate the equipment. (1) The devices are restricted to indoor operations within the 5.15 to 5.25GHz range. (2) For this device to operate in the 5.15 to 5.25GHz range, the devices must use integral antennas.
Appendix Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. 72 D-Link Systems, Inc.