User manual

30D-Link DAP-1320 User Manual
Section 3 - Web-based Conguration
Save the system settings onto a le to the local hard drive.
You will then see a le dialog where you can select a location
and le name for the settings.
Load the system settings from a le on the local hard drive.
Restore the system settings to factory default settings.
Click Reboot to reboot the DAP-1320.
If you have previously installed a Language Pack, you can
remove it by clicking Remove.
Save Settings
To Local Hard
Drive:
Load Settings
From Local
Hard Drive:
Restore
to Factory
Default
Settings:
Reboot the
Device:
Clear
Language
Pack:
System
This page allows you to save or restore your system conguration, reset or reboot the DAP-1320. After making your changes,
click the Save Settings button.