User manual

32D-Link DAP-1330 User Manual
Section 3 - Conguration
Settings
Extender Settings
This page lets you congure the settings for the DAP-1330’s extended wireless network. To access this page, click the Settings drop-
down menu at the top of the page, and select Extender. Click Save to apply the settings and return to the home page.
Enable or disable this network by toggling this slider.
This is the name of the DAP-1330’s extended network.
If using Wi-Fi, the DAP-1330 will rebroadcast the uplink
router’s Internet connection under this SSID. You may also
manually set the SSID of the extended network.
Select the type of wireless security you wish to use for the
extended network. Choose None or WPA/WPA2 Personal.
Enter the password or network key that you wish to use for
the extended network.
Select Auto or any channel from 1 to 13 for use with this
network.
Select Auto 20/40 or 20 MHz for the bandwidth you wish
this network to use.
Enable or disable HT20/40 coexistence by toggling the slider.
Status:
Wi-Fi Name
(SSID):
Security:
Password:
Wi-Fi
Channel:
Channel
Width:
HT20/40
Coexistence:
2.4 GHz Extended Wi-Fi
Existing Network
Select the type of existing network, either Ethernet or Wi-Fi
you want the DAP-1330 to connect to.
Existing
Network: