User's Manual
8D-Link DAP-1520 User Manual
Section 2 - Installation
Setting Up Your DAP-1520
Plug in the DAP-1520 to a power outlet. Verify that the power LED
is blinking orange before continuing.
Outlet
Ethernet
Connecting to Your DAP-1520
You can use the WPS method to connect to the DAP-1520. Press
the WPS button on the DAP-1520 and its green LED will ash.
Then activate WPS on your client device and it should connect
automatically. Once you are connected to the DAP-1520, you can
then congure your DAP-1520 using the web-based conguration
in a web browser.