User's Manual

39D-Link DAP-1650 User Manual
Section 3 - Conguration
Network Settings
The Network Settings page enables you to congure the Local Area Network (LAN) settings for the device. From this page you
can adjust your local network’s IP address settings, and congure IPv6.
Device Name:
LAN IPv4
Connection Type:
IP Address:
Subnet Mask:
Gateway Address:
Primary DNS
Server:
Secondary DNS
Server:
You can change the name of your device to make it easier to
identify. Enter a name for the device in the eld provided. If
you change the device name, you should use this name in your
web browser address bar when trying to access the web-based
conguration utility.
Example: http://devicename
Select how you would like to congure the device’s IP address
settings from the drop-down menu:
Dynamic IP(DHCP) - The device will request an IP address from
the DHCP server that it is connected to.
Static IP - You can manually specify the IP address settings for
the device.
Enter the IP address that you want to specify for the device
(Static IP only).
Enter the subnet mask to be used by the device (Static IP only).
Enter the default gateway address to be used by the device
(Static IP only).
Enter the primary DNS server address to be used by the device
(Static IP only).
Enter the secondary DNS server address to be used by the device
(Static IP only).
Click Save Settings at the bottom of the page to save the
current conguration.