User's Manual
47D-Link DAP-1650 User Manual
Section 3 - Conguration
Transmit Power:
WMM Enable:
Short GI:
WLAN Partition:
Ethernet to WLAN
Access:
HT 20/40
Coexistance:
IGMP Snooping:
Select the desired transmission power of the wireless radio from
the drop-down menu.
Check the box to enable wireless multimedia (WMM), a
QoS engine which can help to reduce lag and latency when
transmitting multimedia over your wireless connection.
Enabling a short guard interval (GI) can increase throughput.
However, it can also increase error rate in some installations, due
to increased sensitivity to radio-frequency reections. Select
the option that works best for your installation.
Enabling this option means that connection wireless clients will
not be able to communicate with one another, but will still have
access to network resources such as the Internet.
When this is enabled there is no barrier to data ow from the
Ethernet to wireless devices using the access point. If this is
disabled, all data from the Ethernet to associated wireless
devices is blocked. Wireless devices can still send data to the
Ethernet
Enable this option to reduce interference from other wireless
networks in your area. If the channel width is operating at
40 MHz and there is another wireless network’s channel over-
lapping and causing interference, the device will automatically
change to 20 MHz.
Enabling this option allows the access point to listen for internet
group management protocol (IGMP) trac, which can help to
detect clients which require multicast streams.
Click Save Settings at the bottom of the page to save the
current conguration.
Advanced Wireless
On this page, you can adjust the advanced wireless settings for each wireless band.