User's Manual

57D-Link DAP-1650 User Manual
Section 3 - Conguration
System
The system page can be used to save and restore the device’s conguration, as well as restore the factory default settings.
Click Save to save the current conguration to a le on your
local computer. After clicking, a Save File dialog will appear,
prompting you to save the conguration le on your computer.
Click Browse to locate a previously saved conguration le
on your local computer. Once the le has been located, click
Upload Settings to apply the conguration in the le to the
device.
Note: This will overwrite any current conguration.
Click Restore Device to reset the DAP-1650’s settings to the
factory defaults.
Warning: This will erase all current settings and cannot be
undone.
Click Reboot to reboot the device. You will need to log in to the
device again once the reboot has been completed.
Click to remove a language pack from the device.
Save Settings to
Local Hard Drive:
Load Settings
From Local Hard
Drive:
Restore to
Factory Default
Settings:
Reboot the
Device:
Remove
Language Pack: