User's Manual

65D-Link DAP-1650 User Manual
Section 3 - Conguration
Time
Displays the device’s current time and date.
Select your time zone from the drop-down menu.
Check the box to have the device automatically adjust the clock
for daylight saving.
Select the oset for beginning daylight saving from the drop-
down menu.
Use the drop-down menus to set the Start and End dates for
daylight saving time.
Check the box to have the device automatically synchronize its
clock and calendar with D-Link’s Internet time server.
Type the address of the NTP server you would like to use in the
eld provided, or choose a pre-determined server from the
drop-down menu and click << to populate the eld.
Use the drop-down menus to manually congure the time and
date. This option will not be available if Enable NTP Server is
selected above.
Click Save Settings at the bottom of the page to save the
current conguration.
Use the time page to congure the time and date settings of the device. You can also congure daylight saving adjustments
and synchronize the device’s clock and calendar with an internet-based network time protocol (NTP) server.
Time:
Time Zone:
Enable Daylight
Saving:
Daylight Saving
Oset:
Daylight Saving
Dates:
Enable NTP
Server:
NTP Server Used:
Set the Time and
Date Manually: