Operation Manual
34D-Link DAP-1665 User Manual
Section 3 - Conguration
Wireless Mode:
Site Survey:
Wireless Network
Name:
802.11 Band:
Channel Width:
Security
Mode:
Wireless MAC
Clone:
Wi-Fi Protected
Setup:
Current PIN:
Select Wireless Client Mode from the drop-down menu.
Click Site Survey to display a list of wireless networks in your
area. To select a wireless network, click the radio button in the
far right column of the scan page. Click Connect at the bottom
of the scan page to conrm the selection. The wireless network
name will automatically appear in the Wireless Network Name
eld below.
Enter the SSID of the wireless network that you wish to connect
to. If you do not know for sure, click Site Survey and select it
from the list, if available.
Select the wireless band of the wireless network that you wish
to connect to. You can only be connected to one wireless band
at any one time.
Select the channel width that you wish to use when connecting
to the wireless network.
Select the wireless security mode and relevant settings used
by the network you are connecting to. For more information
regarding wireless security, please refer to “Conguring Wireless
Security” on page 45.
Check Enable to enable the cloning of another device’s MAC
address by the DAP-1665.
Check Enable if you wish to enable the use of the PIN method
for Wi-Fi Protected Setup (WPS).
Displays the current PIN which can be used to connect to the
router using the WPS-PIN method.
Click Reset PIN to Default to reset the PIN number to the factory
default setting. Click Generate New PIN to randomly generate
a new PIN for WPS connection. Click Process WPS to commence
the WPS Push-Button setup process.
Click Save Settings to save the current conguration.
Wireless Client Mode