Operation Manual

48D-Link DAP-1665 User Manual
Section 3 - Conguration
LAN Setup
The LAN Setup page enables you to congure the Local Area Network (LAN) settings for the access point. From this page you
can adjust your local network’s IP address settings, and congure IPv6.
Dynamic/Static IP
Device Name:
My LAN
Connection is:
IP Address:
Subnet Mask:
Gateway Address:
Primary DNS
Server:
Secondary DNS
Server:
You can change the name of your access point to make it
easier to identify. Enter a name for the access point in the eld
provided. If you change the device name, you should use this
name in your web browser address bar when trying to access
the web-based conguration utility.
Example: http://devicename
Select how you would like to congure the access point’s IP
address settings from the drop-down menu:
Dynamic IP(DHCP) - The access point will request an IP address
from the DHCP server that it is connected to.
Static IP - You can manually specify the IP address settings for
the access point.
Enter the IP address that you want to specify for the access
point (Static IP only).
Enter the subnet mask to be used by the access point (Static
IP only).
Enter the default gateway address to be used by the access
point (Static IP only).
Enter the primary DNS server address to be used by the access
point (Static IP only).
Enter the secondary DNS server address to be used by the access
point (Static IP only).
Click Save Settings at the top of the page to save the current
conguration.