Operation Manual
59D-Link DAP-1665 User Manual
Section 3 - Conguration
Bridge with AP Mode
Advanced Wireless
On this page, you can adjust the advanced wireless settings for both the 2.4 GHz band, and the 5 GHz band.
2.4 GHz Band
Transmit Power:
WMM Enable:
Short GI:
IGMP Snooping:
WLAN Partition:
HT 20/40
Coexistance:
Select the desired transmission power of the wireless radio from
the drop-down menu.
Check the box to enable Wireless Multimedia (WMM), a
QoS engine which can help to reduce lag and latency when
transmitting multimedia over your wireless connection.
Enabling a short Guard Interval (GI) can increase throughput.
However, it can also increase error rate in some installations, due
to increased sensitivity to radio-frequency reections. Select
the option that works best for your installation.
Enabling this option allows the access point to listen for Internet
Group Management Protocol (IGMP) trac, which can help to
detect clients which require multicast streams.
Enabling this option means that connection wireless clients will
not be able to communicate with one another, but will still have
access to network resources such as the Internet.
Enable this option to reduce interference from other wireless
networks in your area. If the channel width is operating at
40 MHz and there is another wireless network’s channel over-
lapping and causing interference, the router will automatically
change to 20 MHz.
Click Save Settings at the top of the page to save the current
conguration.