User Manual
60D-Link DAP-1665 User Manual
Section 3 - Conguration
Static IP
Connection
Type:
LAN IP Address:
Subnet Mask:
Gateway
Address:
Primary DNS
Server:
Secondary DNS
Server:
Management
Link:
Select Static IP to manually assign an IP address to the
DAP-1665.
Enter the IPv4 address that you want to assign to the network
AP. This address should be outside of the uplink router’s DHCP
address pool.
Enter the subnet mask.
Enter the gateway address. This is usually the IP address of the
uplink router.
Enter the address of the primary DNS server.
Enter the address of the secondary DNS server. This is optional
but will provide backup if the primary server fails.
Enter a custom URL link to access this management interface.
IPv4