Version 1.
Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date 1.00 March 16, 2016 1.01 April 8, 2016 Description • Initial release • Regulatory Statements updated Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries.
Table of Contents Table of Contents Preface ................................................................................. i Product Overview .............................................................. 1 Package Contents ......................................................................... 1 System Requirements ................................................................. 2 Introduction ................................................................................... 3 Features.............
Table of Contents Windows Vista®............................................................................58 WPA/WPA2 ............................................................................59 Troubleshooting ..............................................................61 Wireless Basics .................................................................63 Tips...................................................................................................64 Networking Basics .......................
Section 1 - Product Overview Package Contents DAP-1860 AC2600 Wi-Fi Range Extender :L )L &RQ¿JXUDWLRQ 1RWH Wi-Fi Configuration Card Quick Installation Guide If any of the above items are missing, please contact your reseller.
Section 1 - Product Overview System Requirements Network Requirements Web-based Configuration Utility Requirements D-Link DAP-1860 User Manual • A wireless router with an active Internet connection. • IEEE 802.11ac, 802.11n, 802.11g, 802.11b, or 802.
Section 1 - Product Overview Introduction The D-Link DAP-1860 AC2600 Wi-Fi Range Extender extends your Internet connection over a blazing-fast Gigabit Wireless AC connection of up to 2532 Mbps (Up to 1732 Mbps via 5 GHz Wireless AC and up to 600 Mbps via 2.4 GHz Wireless N)1, by using advanced AC beamforming technology to maximize the speed and range of your wireless signal.
Section 1 - Product Overview Features • Superior Wireless Networking - The DAP-1860 AC2600 Wi-Fi Range Extender lets you easily extend a secure wireless network with a press of a button. Connect the DAP-1860 to a router via Wi-Fi or Ethernet and share your high-speed Internet access in more places throughout your home or small office. The DAP-1860 provides Gigabit wireless speeds of up to a combined 2532 Mbps (1732 Mbps 802.11ac 5 GHz, plus 600 Mbps 802.11n 2.4 GHz)1.
Section 1 - Product Overview What is a Wireless Extender? The DAP-1860 acts as a repeater to extend the range of an existing wireless network to provide a better signal for parts of your home or office that may have poor or no reception. Your existing wireless signal will be rebroadcast by the DAP-1860, allowing you to reach the farthest corners of your home or office.
Section 1 - Product Overview Hardware Overview Front and Side 1 3 2 4 1 Status/WPS LED 2 WPS Button Press to establish a connection with another WPS compatible device. Refer to Using the WPS Button on page 46 for more information. 3 Signal Indicator LED The more lit green bars on the Signal Indicator LED, the better the wireless signal to the host network. A single solid amber LED indicates a weak Wi-Fi signal.
Section 1 - Product Overview Status/WPS LED Indicator Status/WPS LED Indicator LED Indicator Color Green Power/Status Status Solid Blinking Description The DAP-1860 is receiving power and connected to a host network. WPS mode is active and ready to add a wireless device. Red Solid The DAP-1860 is booting or an error has occurred. Amber Blinking The DAP-1860 is not connected to a host network. None Off D-Link DAP-1860 User Manual Device is not receiving power. Check the power outlet.
Section 1 - Product Overview Hardware Overview Bottom 1 1 Reset Button 2 Power Switch D-Link DAP-1860 User Manual 2 Use an unfolded paperclip to press and hold the reset button on the bottom of DAP-1860 for 10 seconds to restore the factory default settings. Use the power switch to power the DAP-1860 when it will not be in use for an extended period of time. The factory default is ON.
Section 2 - Installation Hardware Overview Back You may locate the Wi-Fi name (SSID) and password for your DAP-1860. This information is printed on the label on the back of the device. You will need this information to connect your computer or mobile device to the default network (SSID) of your DAP-1860. This information is also provided on the included Wi-Fi configuration card.
Section 2 - Installation Installation Wireless Installation Considerations The DAP-1860 lets you extend your existing wireless network’s coverage as long as it is within range of the uplink network. Keep in mind that the DAP-1860’s extension network’s range may be limited by the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through.
Section 2 - Installation Antenna Setup The DAP-1860 is designed to give you the fastest, most stable network connection possible. In order to maximize performance, fully extend the antennas to provide optimal wireless coverage. Keep the extender in an open area for better wireless coverage.
Section 2 - Installation Hardware Setup Ensure the power switch on the bottom of the DAP-1860 is in the ON position, plug the DAP-1860 into a wall outlet, and wait until the Status/WPS LED is blinking amber.
Section 3 - Configuration Getting Started There are several configuration tools you can use to set up your DAP-1860. • WPS-PBC - To easily extend an existing wireless network, refer to WPS-PBC Configuration on page 14 for setup instructions. • QRS Mobile App - You can use your Android device or iPhone, iPad, or iPod touch to configure your extender. Refer to QRS Mobile App Setup on page 16 for setup instructions.
Section 3 - Configuration WPS-PBC Configuration Wireless Protected Setup (WPS) makes connecting your DAP-1860 easy. To use WPS, first make sure the source router or access point features a WPS Button or has a virtual WPS Button. Step 1 - Initiate WPS Mode While the Status/WPS LED is blinking amber, push the WPS button on the source wireless router or AP, and then push the WPS button on the DAP-1860. The Status/WPS LED will start to flash green. Please allow up to two minutes for the process to finish.
Section 2 - Installation Optimize Extender Location The Status/WPS LED will turn solid green when the DAP-1860 has connected successfully to a wireless network and is extending that network. If the Smart Signal LED has a single amber bar after the connection process has finished, the DAP-1860 has established a poor quality connection. The more lit bars on the Signal Indicator LED, the better the wireless signal.
Section 2 - Installation QRS Mobile App Setup The DAP-1860 can be set up from your iPhone, iPod touch, iPad, or Android smartphone or tablet device using the QRS Mobile app. Note: The screenshots may be different depending on your mobile device’s OS version. Step 1 Search for the free QRS Mobile app on the Apple App Store or Google Play and install it. Step 2 Once your app is installed, connect your mobile device to the wireless network of your DAP-1860.
Section 3 - Configuration Click Start to continue. Click Next to continue.
Section 3 - Configuration QRS Mobile will first detect your DAP-1860, then scan for available Wi-Fi networks. Select the network you wish to extend. Tap Rescan if your network doesn’t show up the first time. Enter the password for the existing Wi-Fi network. Click Next to continue.
Section 3 - Configuration Enter a network name (SSID) and password for the extended Wi-Fi network. Click Next to continue. Create an admin password for the DAP-1860’s web-based configuration utility. Click Next to continue.
Section 3 - Configuration A summary of your settings will be displayed. Click Save to reboot the device and to complete the setup. After the setup wizard is complete, the following screen will appear. To connect to the extended network, you can now change your mobile device and laptop Wi-Fi settings to the wireless network name and password you just created. You can also share your Wi-Fi information by clicking Share by E-mail.
Section 3 - Configuration Web-based Setup To access the setup utility for the DAP-1860 AC2600 Wi-Fi Range Extender on your PC, first connect to the DAP-1860 wirelessly using the Wi-Fi name (SSID) and password located on your Wi-Fi Configuration Card. Then open a web browser and enter http://dlinkap.local./ in your browser’s URL field. You may also enter the IP address* of the DAP-1860. Note: Web browser configuration is not supported for Android Devices.
Section 3 - Configuration Setup Wizard If this is your first time logging in to the extender and no connection has been established, the setup wizard will automatically appear. In the future, if you wish to set up your extender using the setup wizard, click the Uplink Router icon. The setup wizard is designed to guide you through a step-by-step process to configure your new DAP-1860 AC2600 Wi-Fi Range Extender to extend your wireless network and connect to the Internet.
Section 3 - Configuration Connecting Your Device via WPS After clicking the Next button from the previous step, the DAP-1860 will automatically initiate a WPS-PBC (Wireless Protected Setup - Push Button Control) search to find an uplink network to extend. If your existing wireless networking device has a physical or virtual WPS button, press or enable it within the 120 seconds allotted by the countdown timer.
Section 3 - Configuration WPS Successful If a WPS connection is successfully established, you will be prompted to configure your extension network settings. The current network names and passwords will be displayed. The Setup Wizard automatically enables Smart Connect, presenting clients with a single wireless network. If you wish to individually configure the 2.4 and 5 GHz networks, complete the Setup Wizard first, then refer to Extender Settings on page 36.
Section 3 - Configuration Extend an Existing Network To set up your network manually, select Extend an Existing Network from the setup wizard menu. Click Next to continue. The DAP-1860 will scan for available wireless networks and display a list of results. You may choose one of the following options to proceed: • • If the wireless network you wish to extend was detected by the scan, click on the network to select it. The extender will automatically forward you to the next step.
Section 3 - Configuration If the wireless network you wish to extend was detected by the scan, enter its password now. Click Next to continue on to configure your extension network settings, or click Back to return to the previous step. dlinkrouter If you chose Manual , enter the Wireless Network Name, type of Security, and Password of the existing Wi-Fi network you wish to connect to. Click Next to continue on to configure your extension network settings, or click Back to return to the previous step.
Section 3 - Configuration If a connection is successfully established, you will be prompted to configure your extension network settings. The current network names and passwords will be displayed. The Setup Wizard automatically enables Smart Connect, presenting clients with a single wireless network. If you wish to individually configure 2.4 and 5 GHz networks, complete the Setup Wizard first, then refer to Extender Settings on page 36.
Section 3 - Configuration Add Wireless to Your Wired Network This portion of the setup wizard will guide you through adding a wireless network to an existing wired network. Click Add wireless to your wired network to proceed. Connect an Ethernet cable to your DAP-1860 if you have not already done so. After making the connection, you will automatically be forwarded to the next step. If you haven’t connected an Ethernet cable yet, but will do so later, click Skip.
Section 3 - Configuration If a connection is successfully established, you will be prompted to configure your wireless network settings. The current network names and passwords will be displayed. The Setup Wizard automatically enables Smart Connect, presenting clients with a single wireless network. If you wish to individually configure 2.4 and 5 GHz networks, complete the Setup Wizard first, then refer to Extender Settings on page 36.
Section 3 - Configuration Configure Administrator Password In order to secure the extender’s web configuration utility, please enter a new password. You will be prompted for this password each time you want to use the extender’s web configuration utility. Click Next to continue onward to Save Your Configuration.
Section 3 - Configuration Save Your Configuration At the end of the wizard, you will be presented with a final summary of your settings. It is recommended that you record this information for future reference. Click Finish to close the wizard. dlink0692 SecurePassword4WiFi SecurePassword9 *Wireless network names and passwords are shown for example only. You will be asked if you wish to create a bookmark to the web configuration utility. Your changes will be saved and the extender will reboot.
Section 3 - Configuration Configuration Home The home screen gives a summary of the current status of devices connected to the DAP-1860. A green check between the device and the uplink router indicates that they are connected. A red X indicates that there is no connection present, or there is a connection error. To fix this, click on the Uplink Router icon to start the setup wizard. Uplink Router: This icon shows the status of the connection to the uplink router.
Section 3 - Configuration Uplink Router Upon clicking the Uplink Router icon, you will see the connection type, network status, connection up time, network name (SSID), and password.
Section 3 - Configuration DAP-1860 To view the DAP-1860’s Network and Wi-Fi information, click on the DAP-1860 icon. Your Network and Extended Wi-Fi Network settings are displayed at the bottom of the page. Your Extender’s MAC, IPv4, subnet mask, default gateway, and DNS Server addresses are displayed. To change the Network settings, refer to page 38. Your Extender’s extended Wi-Fi network name and password are also displayed. To change the extended Wi-Fi network settings, refer to page 36.
Section 3 - Configuration Connected Clients Click on the Connected Clients icon to view details about the extender and its wireless settings. On this page, you can see all the clients currently connected to the extender, along with their IP and MAC addresses.
Section 3 - Configuration Settings Extender Settings This page lets you configure the settings for the DAP-1860’s extended wireless network. To access this page, click the Settings dropdown menu at the top of the page, and select Extender. Click Save to apply the settings and return to the home page. Existing Network Existing Select whether you want to connect the DAP-1860 to an existing Ethernet Network: or Wi-Fi network. Smart Connect Smart Enable or disable Smart Connect by toggling this slider.
Section 3 - Configuration If Smart Connect disabled: 2.4 GHz Extended Wi-Fi Status: Enable or disable this network by toggling this slider. Wi-Fi Name This is the name of the DAP-1860’s 2.4 GHz extended network. If using Wi-Fi, (SSID): the DAP-1860 will rebroadcast the uplink router’s Internet connection under this SSID. You may also manually set the SSID of the extended network. Password: Enter the password or network key that you wish to use for the extended network.
Section 3 - Configuration Network Settings This page lets you configure the network settings for the DAP-1860. To access this page, click the Settings drop-down menu at the top of the page, then select Network. Click Save at any time to save the changes you have made on this page. Management You can change the URL name of the device by editing the Link: text in the text box. If you change the name of the device, you will need to enter http://xxxx.local.
Section 3 - Configuration Autoconfiguration (SLAAC/DHCPv6) IPv6 Device Management Interface My IPv6 Select Autoconfiguration (SLAAC/DHCPv6) to have the Connection is: DAP-1860 automatically receive an IPv6 address from the uplink router. Obtain IPv6 You can select to obtain IPv6 DNS server information DNS Servers automatically, or you can select to configure DNS servers Automatically: manually by clicking on the radio dial next to the option.
Section 3 - Configuration Static IPv6 IPv6 Device Management Interface My IPv6 Select Static IPv6 to manually assign an IP address to the Connection is: DAP-1860. IPv6 Address: Enter the IPv6 address that you want to assign to the extended network. This address should be outside of the uplink router’s DHCP address pool. Subnet Prefix Enter the length of the IPv6 subnet prefix. Length: Default Gateway: Enter the default gateway. Primary DNS Enter the primary IPv6 DNS server address.
Section 3 - Configuration Link-local Only IPv6 Device Management Interface My IPv6 Select Link-local only to only set an IPv6 address for the Connection is: local network. LAN IPv6 Link- This will show link-local address of the DAP-1860.
Section 3 - Configuration Management Admin This page will allow you to set a new password for the administrator account used to configure the DAP-1860. You can also enable graphical authentication (CAPTCHA) on this page. To access this page, click the Management drop down menu at the top of the page, and select Admin. Click Save at any time to save the changes you have made on this page. Admin Enter the Admin password.
Section 3 - Configuration System This page allows you to save or restore your system configuration, reset, or reboot the DAP-1860. To access this page, click the Management drop down menu at the top of the page, and select System. Click Save at any time to save the changes you have made on this page. Save Settings Save the system settings to a file to the local hard drive. You To Local Hard will then see a file dialog where you can select a location and Drive: enter a file name for the configuration file.
Section 3 - Configuration Upgrade Firmware and language upgrades may be provided for the DAP-1860 in the future. You can check and upgrade your firmware and language pack on this page. To access this page, click the Management drop down menu at the top of the page, and select Upgrade. Click Save at any time to save the changes you have made on this page.
Section 3 - Configuration Statistics This page displays details about your wireless and network connections. To access this page, click the Management drop- down menu at the top of the page, and select Statistics. Click Clear to reset the statistics. Statistics Tabs Click on the each tab to see traffic information about each of the DAP-1860’s interfaces. The Blue line indicates the upload speeds and the red line indicates the download speeds.
Section 4 - Connecting a Wireless Client Connecting Wireless Clients to the Extended Network Using the WPS Button Once an uplink network has been established, you may use the DAP-1860’s WPS function to add additional wireless clients to your extended network. Many wireless devices such as wireless routers, media players, printers, and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DAP-1860.
Section 4 - Connecting a Wireless Client Connecting to a Wireless Network Windows® 10 To connect to a wireless network using Windows 10, you will need to know the wireless network name (SSID) and Wi-Fi password (security key) of the device you are connecting to. To join an existing network, locate the wireless network icon in the taskbar, next to the time display and click on it. Wireless Icon Clicking on this icon will display a list of wireless networks which are within range of your computer.
Section 4 - Connecting a Wireless Client To connect to the network, click Connect. To automatically connect when your device is in range, click the Connect Automatically check box. Your computer will now automatically connect to this wireless network whenever it is detected. You will then be prompted to enter the Wi-Fi password (network security key) for the wireless network. Enter the password into the box and click Next to connect to the network.
Section 4 - Connecting a Wireless Client Windows® 8 WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or extender before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used. To join an existing network, locate the wireless network icon in the taskbar, next to the time display.
Section 4 - Connecting a Wireless Client You will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router at this point to enable the WPS function.
Section 4 - Connecting a Wireless Client Windows® 7 WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or extender before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). Wireless Icon 2. The utility will display any available wireless networks in your area.
Section 4 - Connecting a Wireless Client 3. Highlight the wireless network (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Wireless Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router.
Section 4 - Connecting a Wireless Client 5. Enter the same security key or passphrase that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router.
Section 5 - Connecting to a Wireless Network WPS The WPS feature of the DAP-1860 can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu. 2. Click Network on the left side.
Section 5 - Connecting to a Wireless Network 3. Double-click the DAP-1860. DAP-1860 4. Input the WPS PIN number (on the router label) in the Setup > Wireless Setup menu in the Router’s Web UI) and click Next.
Section 5 - Connecting to a Wireless Network 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue.
Section 5 - Connecting to a Wireless Network 7. The following window appears while the Router is being configured. Wait for the configuration to complete. 8. The following window informs you that WPS on the router has been set up successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup.
Section 4 - Connecting a Wireless Client Windows Vista® Windows Vista® users may use the built-in wireless utility. If you are using another company’s utility or Windows® 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows Vista® utility as seen below. If you receive the “Wireless Networks Are Available” bubble, click on the center of the bubble to access the utility.
Section 4 - Connecting a Wireless Client WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or extender before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2.
Section 4 - Connecting a Wireless Client 3. Enter the same security key or passphrase that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router.
Section 5 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DAP-1860. Read the following descriptions if you are having problems. The examples below are illustrated in Windows® XP. If you have a different operating system, the screenshots on your computer will look similar to the following examples. 1.
Section 5 - Troubleshooting • Configure your Internet settings: • Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults. • Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. • Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.
Appendix A - Wireless Basics Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely and conveniently access your network. You will be able to enjoy the freedom that wireless networking delivers.
Appendix A - Wireless Basics Tips Here are a few things to keep in mind when you are installing your AC2600 Wi-Fi Range Extender. Centralize the extender’s location For best performance, make sure you place the extender in a centralized location within your desired usage area. Try to place the extender so that there are minimal obstructions between it and the uplink router. If possible, use an elevated power outlet, so the signal can be dispersed more easily.
Appendix B - Networking Basics Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. Click on Start > Run. In the run box type cmd and click OK. (Windows® 7/Vista® users type cmd in the Start Search box.) At the prompt, type ipconfig and press Enter.
Appendix B - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below: Step 1 Windows® 7 Windows Vista® Windows® XP Windows® 2000 - Click on Start > Control Panel > Network and Internet > Network and Sharing Center. Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections. Click on Start > Control Panel > Network Connections.
Appendix B - Networking Basics Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DAP-1860 offers the following types of security: • • WPA2 (Wi-Fi Protected Access 2) • • WPA (Wi-Fi Protected Access) • WPA2-PSK (Pre-Shared Key) • WPA-PSK (Pre-Shared Key) What is WPA? WPA (Wi-Fi Protected Access), is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy).
Appendix B - Technical Specifications Technical Specifications Standards • IEEE 802.11ac • IEEE 802.11a • IEEE 802.11n • IEEE 802.11g • IEEE 802.11b Wireless Frequency Range 1 • 2.4 GHz to 2.4835 GHz • 5.15GHz to 5.25GHz, 5.725GHz to 5.85GHz USA • 5.15 GHz to 5.175 GHz European Countries Device Interfaces • 802.
Appendix C - GPL Code Statement GPL Code Statement This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at: http://tsd.dlink.com.tw/GPL.
Appendix C - GPL Code Statement Preamble The GNU General Public License is a free, copyleft license for software and other kinds of works. The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users.
Appendix C - GPL Code Statement Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free.
Appendix C - GPL Code Statement 1. Source Code. The “source code” for a work means the preferred form of the work for making modifications to it. “Object code” means any non-source form of a work. A “Standard Interface” means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language.
Appendix C - GPL Code Statement 2. Basic Permissions. All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work.
Appendix C - GPL Code Statement 4. Conveying Verbatim Copies.
Appendix C - GPL Code Statement 6. Conveying Non-Source Forms. You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machine-readable Corresponding Source under the terms of this License, in one of these ways: a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange.
Appendix C - GPL Code Statement A “User Product” is either (1) a “consumer product”, which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage.
Appendix C - GPL Code Statement 7. Additional Terms. “Additional permissions” are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law.
Appendix C - GPL Code Statement All other non-permissive additional terms are considered “further restrictions” within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term.
Appendix C - GPL Code Statement from you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same material under section 10. 9. Acceptance Not Required for Having Copies. You are not required to accept this License in order to receive or run a copy of the Program.
Appendix C - GPL Code Statement 11. Patents. A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor’s “contributor version”.
Appendix C - GPL Code Statement A patent license is “discriminatory” if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that are specifically granted under this License.
Appendix C - GPL Code Statement 14. Revised Versions of this License. The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number.
Appendix C - GPL Code Statement 17. Interpretation of Sections 15 and 16. If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee.
Appendix D - Regulatory Information Regulatory Statements Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix D - Regulatory Information RF Frequency Requirements This device is for indoor use only when using all channels in the 5.150 GHz-5.250 GHz, 5.250 GHz-5.350 GHz, 5.470 GHz-5.725 GHz, and 5.725 GHz-5.850 GHz frequency range. High power radars are allocated as primary users of the 5.150 GHz-5.250 GHz, 5.250 GHz-5.350 GHz, 5.470 GHz5.725 GHz, and 5.725 GHz-5.850 GHz bands. These radar stations can cause interference with and/or damage this device.
Appendix D - Regulatory Information Table for Filed Antenna Ant. 1 2 Brand Whayu Whayu Model Name C529-510583-A C529-510584-A Antenna Type External antenna, non-detachable External antenna, non-detachable Antenna Gain (dBi) Connector Ipex Ipex 2.
Appendix D - Regulatory Information Industry Canada Statement: This device complies with ISED licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence.
Appendix D - Regulatory Information 1&& 警語： 以下警語適用台灣地區 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。低功率 射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通 信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 本模組於取得認證後將依規定於模組本體標示審驗合格標籤系統廠商應於平台上標示「本產品內含射頻模 組: 」字樣 無線傳輸設備 (UNII) 在 5.25-5.
Appendix D - Regulatory Information European Union: This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. For more information, please refer to the Declaration of Conformity. Notice of Wireless Radio LAN Usage in The European Community: • At the time of writing this addendum, some countries such as Italy, Greece, Portugal, and Spain have not allowed operation of radio devices in the 5 GHz bands, although operation of 2.4 GHz radio devices is allowed.
Appendix D - Regulatory Information 2.4 GHz Wireless Frequency and Channel Operation in EEC Countries: Region Frequency Band Max output power (EIRP) Metropolitan 2400 - 2454 MHz 100 mW Guadeloupe, Martinique, St Pierre et Miquelon, Mayotte 2454 - 2483.5 MHz 100 mW indoor, 10 mW outdoor Reunion et Guyane 2400 - 2483.5 MHz 100 mW Rest of EU community 2420 - 2483.5 MHz 100 mW R&TTE 1999/5/EC WLAN 2.4 - 2.4835 GHz IEEE 802.11b/g/n Spectrum Regulation MHz, Europa (ETSI) max.
Appendix D - Regulatory Information 5 GHz Wireless Frequency and Channel Operation in EEC Countries: Allowable 802.11a Frequencies and Channels Countries 5.15-5.25 GHz (Channels 36, 40, 44, 48) Liechtenstein 5.15-5.25 GHz & 5.725-5.875 GHz (Channels 36, 40, 44, 48, 149, 153, 157, 161, 165, 169) Austria 5.15-5.35 GHz (Channels 36, 40, 44, 48, 52, 56, 60, 64) France 5.15-5.35 & 5.47-5.
Appendix D - Regulatory Information European Community Declaration of Conformity: Česky [Czech] D-Link tímto prohlašuje, že tento DAP-1860 je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish] Undertegnede D-Link erklærer herved, at følgende udstyr DAP-1860 overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Appendix D - Regulatory Information Polski [Polish] Niniejszym D-Link oświadcza, że DAP-1860 jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Português [Portuguese] D-Link declara que este DAP-1860 está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE. Slovensko [Slovenian] D-Link izjavlja, da je ta DAP-1860 v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ ES.
Appendix D - Regulatory Information Disposing of and Recycling Your Product ENGLISH EN This symbol on the product or packaging means that according to local laws and regulations this product should be not be disposed of in household waste but sent for recycling. Please take it to a collection point designated by your local authorities once it has reached the end of its life, some will accept products for free.
Appendix D - Regulatory Information FRANÇAIS FR Ce symbole apposé sur le produit ou son emballage signifie que, conformément aux lois et règlementations locales, ce produit ne doit pas être éliminé avec les déchets domestiques mais recyclé. Veuillez le rapporter à un point de collecte prévu à cet effet par les autorités locales; certains accepteront vos produits gratuitement.
Appendix D - Regulatory Information ITALIANO IT La presenza di questo simbolo sul prodotto o sulla confezione del prodotto indica che, in conformità alle leggi e alle normative locali, questo prodotto non deve essere smaltito nei rifiuti domestici, ma avviato al riciclo. Una volta terminato il ciclo di vita utile, portare il prodotto presso un punto di raccolta indicato dalle autorità locali. Alcuni questi punti di raccolta accettano gratuitamente i prodotti da riciclare.
Appendix D - Regulatory Information POLSKI PL Ten symbol umieszczony na produkcie lub opakowaniu oznacza, że zgodnie z miejscowym prawem i lokalnymi przepisami niniejszego produktu nie wolno wyrzucać jak odpady czy śmieci z gospodarstwa domowego, lecz należy go poddać procesowi recyklingu. Po zakończeniu użytkowania produktu, niektóre odpowiednie do tego celu podmioty przyjmą takie produkty nieodpłatnie, dlatego prosimy dostarczyć go do punktu zbiórki wskazanego przez lokalne władze.
Appendix D - Regulatory Information MAGYAR HU Ez a szimbólum a terméken vagy a csomagoláson azt jelenti, hogy a helyi törvényeknek és szabályoknak megfelelően ez a termék nem semmisíthető meg a háztartási hulladékkal együtt, hanem újrahasznosításra kell küldeni. Kérjük, hogy a termék élettartamának elteltét követően vigye azt a helyi hatóság által kijelölt gyűjtőhelyre. A termékek egyes helyeken ingyen elhelyezhetők.
Appendix D - Regulatory Information DANSK DK Dette symbol på produktet eller emballagen betyder, at dette produkt i henhold til lokale love og regler ikke må bortskaffes som husholdningsaffald, mens skal sendes til genbrug. Indlever produktet til et indsamlingssted som angivet af de lokale myndigheder, når det er nået til slutningen af dets levetid. I nogle tilfælde vil produktet blive modtaget gratis.
Appendix D - Regulatory Information SVENSKA SE Den här symbolen på produkten eller förpackningen betyder att produkten enligt lokala lagar och föreskrifter inte skall kastas i hushållssoporna utan i stället återvinnas. Ta den vid slutet av dess livslängd till en av din lokala myndighet utsedd uppsamlingsplats, vissa accepterar produkter utan kostnad. Genom att på detta sätt återvinna produkten och förpackningen hjälper du till att bevara miljön och skydda människors hälsa.
