User manual
26D-Link DCH-M225 User Manual
Section 3 - Conguration
Audio Renderer
This page allows you to congure the settings for the DCH-M225’s audio extending feature, so your music can be streamed
wirelessly from a DLNA-certied* DMS device. To access this page from the Home page, click on the Settings drop-down menu
at the top of the page, and select Audio Renderer.
Click on the slider to enable or disable the DLNA Renderer
feature. When this option is enabled, any DLNA compatible
device will be able to nd the DCH-M225 using the device
name that is set in the Device Name eld below.
Click on the slider to enable or disable the AirPlay feature.
When this option is enabled, any AirPlay compatible device
will be able to nd the DCH-M225 using the device name
that is set in the Device Name eld below.
You can enter a name for your device in this eld. Other
devices on your network that can stream audio through
DLNA or AirPlay will be able to identify your DCH-M225 by
this name.
Click Save to save the settings and return to the Home page.
DLNA
Renderer
Status:
AirPlay
Status:
Device Name:
*Note: DLNA certication ensures that a device can communicate with other DLNA certied products within a connected home.