User manual
45D-Link DCS-6511 User Manual
Conguration
Enabling Video Motion will allow your camera to use the motion detection feature. You may draw a nite motion area that will be used
for monitoring.
Select this box to enable the motion detection
feature of your camera.
Species the measurable difference between two
sequential images that would indicate motion.
Please enter a value between 0 and 100.
Species the amount of motion in the window
being monitored that is required to initiate an
alert. If this is set to 100%, motion is detected
within the whole window will trigger a snapshot.
Draw the motion detection area by dragging your
mouse in the window (indicated by the red square).
To erase a motion detection area, simply click on the red square that you wish to remove.
Right clicking on the camera image brings up the following menu options:
Draws a motion detection area over the
entire screen.
Clears any motion detection areas that
have been drawn.
Restores the previously specied motion
detection areas.