User manual
56D-Link DCS-6511 User Manual
Conguration
This screen allows you to control the behavior of digital input and digital output devices. The I/O connector provides the physical
interface for digital output (DO) and digital input (DI) that is used for connecting a diversity of external alarm devices such as IR-Sensors
and alarm relays. The digital input is used for connecting external alarm devices and once triggered images will be taken and e-mailed.
The camera will send a signal when an event
is triggered, depending upon the type of device
connected to the DI circuit.
N.C. stands for . This means that
the normal state of the circuit is closed. Therefore
events are triggered when the device status changes
to .
N.O. stands for . This means that
the normal state of the circuit is open. Therefore
events are triggered when the device status changes
to .
You may specify whether or not to illuminate the
LED on the side of the camera.
Enable/ disable the BNC terminal TV output signal.