User manual

8D-Link DCS-6511 User Manual
Installation
A. Depending on how you choose to mount the camera, you may need to
change the orientation of the cable. For instance, when using the Surface
Mounting Bracket, the cables may need to exit through the side of the
camera base rather than the top.

1. Disassemble the camera enclosure. (See Figure A. on page 6.)
2. Loosen, but do not remove, the two screws that secure the camera
bracket to the base of the enclosure using a screwdriver. (Figure 1.1)
3. Slide the camera bracket towards the front of the camera base.
(Figure 1.2)


