User manual

31D-Link DCS-7110 User Manual
Conguration
Image Settings
This page allows you to tune the white balance, brightness, saturation, contrast, and
sharpness settings for the video.
Color: Select either a Color or B/W (black and white, monochrome) video display.
Power Line Frequency: Select either 50 or 60 Hz depending on your region.
Video Orientation: Flip will vertically rotate the video. Mirror will horizontally rotate
the video. You may select both options if camera is being installed upside down.
White Balance: This adjusts the relative amount of red, green and blue primary
colors in the image so that the neutral colors are reproduced correctly.
• Auto: The camera automatically adjusts the color temperature of the light in
response to dierent light sources. The white balance setting defaults to Auto
and works well in most situations.
• Fixed: Follow the steps below to manually set the white balance to compensate
for the ambient lighting conditions.
1. Set the White balance to Auto and click Save.
2. Place a sheet of white paper in front of the lens, then allow the camera to adjust
the color temperature automatically.
3. Select Fixed to conrm the setting while the white balance is being measured.
4. Click Save to enable the new setting.
Brightness: Adjust the image brightness level, which ranges from -5 to +5
Saturation: Adjust the image saturation level, which ranges from -5 to +5
Contrast: Adjust the image contrast level, which ranges from -5 to +5