User manual

54D-Link DCS-7110 User Manual
Conguration
Maximum duration: Specify the maximum recording duration in seconds. Up to 20
seconds can be set. For example, if pre-event recording is set to 5 seconds and the
maximum duration is set to 10 seconds, the camera continues to record for another
4 seconds after a trigger is activated.
Maximum le size: Specify the maximum le size allowed.
File name prex: Enter the text that will be appended to the front of the le name.
Click Save to enable the settings, then click Close to exit the page.
System log: Select to send a system log when a trigger is activated.
Click Save to enable the settings, then click Close to exit the page. When completed,
click Save to enable the settings and click Close to exit this page. The new media
settings will appear on the Event Settings page.
Event Settings
In the Event Settings column, click Add to open the Event Settings page. On this
page, you can arrange three elements -- Trigger, Schedule, and Action to set an event.
A total of 3 event settings can be congured.
Event name: Enter a name for the event.
Enable this event: Select to activate this event.
Priority: Set the priority for this event (High, Normal, or Low). The event with higher
priority will be executed rst
Detect next event after * seconds: Select the delay time before selecting the next
event. It is being used for both events of motion detection and digital input trigger.
Trigger
This is the cause or stimulus which denes when to trigger the camera. The trigger
source can be congured to use the camera’s built-in motion detection mechanism
or external digital input devices. There are several choices of trigger sources as shown
below. Select the item to display the detailed conguration options. The input type
that triggers the event.