Specifications

DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
139
DES-1228/ME:4#show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State : Disabled
Multicast Router Only : Disabled
Data Driven Learning Max Entries : 56
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Host Timeout : 260
Route Timeout : 260
Leave Timer : 2
Querier State : Disabled
Querier Router Behavior : Non-Querier
State : Disabled
Multicast Fast Leave : Disabled
Data Driven Learning Aged Out : Disabled
VLAN Name : RG
Query Interval : 125
Max Response Time : 10
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
show router_ports
Purpose Used to display the currently configured router ports on the Switch.
Syntax
show router_ports {vlan <vlan_name 32>} {[static | dynamic | forbidden]}
Description This command will display the router ports currently configured on the Switch.
Parameters
<vlan_name 32> − The name of the VLAN on which the router port resides.
static − Displays router ports that have been statically configured.
dynamic − Displays router ports that have been dynamically configured.
forbidden − Displays forbidden router ports that have been statically configured.
Restrictions None.
Example usage:
To display the router ports.