Specifications

DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
149
show dhcp_relay
Purpose Used to display the current DHCP/BOOTP relay configuration.
Syntax
show dhcp_relay {ipif [System]}
Description This command will display the current DHCP relay configuration for the Switch.
Parameters
ipif System − The name of the IP interface for which to display the current DHCP relay
configuration.
Restrictions None.
Example usage:
To show the DHCP relay configuration:
DES-1228/ME:4#show dhcp_relay
Command: show dhcp_relay
DHCP/BOOTP Relay Status : Disabled
DHCP/BOOTP Hops Count Limit : 4
DHCP/BOOTP Relay Time Threshold : 0
DHCP Relay Agent Information Option 82 State : Disabled
DHCP Relay Agent Information Option 82 Check : Disabled
DHCP Relay Agent Information Option 82 Policy : Replace
DHCP Relay Agent Information Option 82 Remote ID : 00-19-5B-EF-78-B5
Interface Server 1 Server 2 Server 3 Server 4
------------ --------------- --------------- --------------- --------------
DES-1228/ME:4#
Example usage:
To show a single IP destination of the DHCP relay configuration:
DES-1228/ME:4#show dhcp_relay ipif System
Command: show dhcp_relay ipif System
Interface Server 1 Server 2 Server 3 Server 4
--------- ----------- ------------ ----------- --------------
System 10.58.44.6
DES-1228/ME:4#
enable dhcp_relay
Purpose Used to enable the DHCP/BOOTP relay function on the Switch.
Syntax
enable dhcp_relay
Description This command is used to enable the DHCP/BOOTP relay function on the Switch.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To enable DHCP relay: