Specifications

DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
210
Example usage:
To configure the user defined method list “Permit” with authentication methods TACACS, XTACACS and local, in that
order.
DES-1228/ME:4#config authen_enable method_list_name Trinity method tacacs xtacacs local
Command: config authen_enable method_list_name Trinity method tacacs xtacacs local
Success.
DES-1228/ME:4#
Example usage:
To configure the default method list with authentication methods XTACACS, TACACS+ and local, in that order:
DES-1228/ME:4#config authen_enable default method xtacacs tacacs+ local
Command: config authen_enable default method xtacacs tacacs+ local
Success.
DES-1228/ME:4#
delete authen_enable method_list_name
Purpose Used to delete a user-defined method list of authentication methods for promoting normal
user level privileges to Administrator level privileges on the Switch.
Syntax
delete authen_enable method_list_name <string 15>
Description This command is used to delete a user-defined method list of authentication methods for
promoting user level privileges to Administrator level privileges.
Parameters
<string 15> − Enter an alphanumeric string of up to 15 characters to define the given
enable method list to delete.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To delete the user-defined method list “Permit”
DES-1228/ME:4#delete authen_enable method_list_name Permit
Command: delete authen_enable method_list_name Permit
Success.
DES-1228/ME:4#
show authen_enable
Purpose Used to display the method list of authentication methods for promoting normal user level
privileges to Administrator level privileges on the Switch.
Syntax
show authen_enable [default | method_list_name <string 15> | all]
Description This command is used to delete a user-defined method list of authentication methods for
promoting user level privileges to Administrator level privileges.
Parameters
default – Entering this parameter will display the default method list for users attempting to
gain access to Administrator level privileges on the Switch.
method_list_name <string 15> − Enter an alphanumeric string of up to 15 characters to
define the given method list the user wishes to view.