Specifications

DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
218
delete authen server_group
Purpose Used to delete a user-defined authentication server group.
Syntax
delete authen server_group <string 15>
Description This command will delete an authentication server group.
Parameters
<string 15> − Enter an alphanumeric string of up to 15 characters to define the previously
created server group to be deleted.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To delete the server group “group_1”:
DES-1228/ME:4#delete server_group group_1
Command: delete server_group group_1
Success.
DES-1228/ME:4#
show authen server_group
Purpose Used to view authentication server groups on the Switch.
Syntax
show authen server_group <string 15>
Description This command will display authentication server groups currently configured on the Switch.
This command will display the following fields:
Group Name − The name of the server group currently configured on the Switch, including
built in groups and user defined groups.
IP Address − The IP address of the server host.
Protocol − The authentication protocol used by the server host.
Parameters
<string 15> − Enter an alphanumeric string of up to 15 characters to define the previously
created server group to be viewed.
Entering this command without the <string> parameter will display all authentication server
groups on the Switch.
Restrictions None.
Example usage:
To view authentication server groups currently set on the Switch.
DES-1228/ME:4#show authen server_group
Command: show authen server_group
Group Name IP Address Protocol
----------- ----------------------------- ------------
radius --------------------------------------------------------
tacacs --------------------------------------------------------
tacacs+ --------------------------------------------------------
xtacacs --------------------------------------------------------
Total Entries : 4
DES-1228/ME:4#