Specifications

DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual

config greeting _message

described on the Banner Editor:

Quit without save: Ctrl+C

Save and quit: Ctrl+W

Move cursor: Left/Right/Up/Down

Delete line: Ctrl+D

Erase all setting: Ctrl+X

Reload original setting: Ctrl+L

Restrictions Only Administrator-level users can issue this command. Other restrictions include:

If the “reset/reset config” command is executed, the modified banner will remain

modified. However, the “reset system” command will reset the modified banner to the

original factory banner.

The capacity of the banner is 6*80. 6 Lines and 80 characters per line.

Ctrl+W will only save the modified banner in the DRAM. Users need to type the “save”

command to save it into FLASH.

Only valid in threshold level.

Example usage:

To modify the banner to read “Say goodnight, Gracie”:

DES-1228/ME:4# config greeting_message

Command: config greeting_message

Greeting Messages Editor

================================================================================

DES-1228/ME Metro Ethernet Switch

Command Line Interface

Firmware: Build 1.00.B04

================================================================================

Ctrl+C Quit without save left/right/

Ctrl+W Save and quit up/down Move cursor

Ctrl+D Delete line

Ctrl+X Erase all setting

Ctrl+L Reload original setting

--------------------------------------------------------------------------------

show greeting_message

Purpose Used to view the currently configured greeting message configured on the Switch.

Syntax

show greeting_message

Description This command is used to view the currently configured greeting message on the

Switch.

Parameters None.

Restrictions None.