Specifications

DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
270
39
PPPOE COMMANDS
The PPPoE commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following
table.
Command Parameters
config pppoe circuit_id_insertion state [enable | disable]
show pppoe circuit_id_insertion
show pppoe circuit_id_insertion ports {<portlist>}
config pppoe circuit_id_insertion ports <portlist> {state [enable | disable] | circuit_id [mac | ip | udf <string
32>]}(1)
Each command is listed, in detail, in the following sections.
config pppoe circuit_id_insertion state
Purpose Used to enable PPPoE circuit ID insertion operations on the switch.
Syntax
config pppoe circuit_id_insertion state [enable | disable]
Description Used to enable PPPoE circuit ID insertion operations on the switch.
Parameters
state [enable | disable] – The user can enable or disable this option
Restrictions Only Administrator-level users can issue this command.
Example usage
To enable PPPoE circuit ID insertion:
DES-1228/ME:4#config pppoe circuit_id_insertion state enable
Command: config pppoe circuit_id_insertion state enable
Success.
DES-1228/ME:4#
show pppoe circuit_id_insertion
Purpose Used to display PPPoE circuit ID insertion operations on the switch.
Syntax show pppoe circuit_id_insertion
Description Used to display PPPoE circuit ID insertion operations on the switch.
Parameters None
Restrictions None.