Specifications

DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
295
46
ARP SPOOFING ATTACK PREVENTION LIST
The switch history commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
config arp_spoofing_prevention [add gateway_ip <ipaddr> gateway_mac <macaddr> ports [<portlist>|all] |
delete gateway_ip <ipaddr>]
show arp_spoofing_prevention
config arp_spoofing_prevention
Purpose This command is used to configure ARP spoofing prevention.
Syntax
config arp_spoofing_prevention [add gateway_ip <ipaddr> gateway_mac
<macaddr> ports [<portlist>|all] | delete gateway_ip <ipaddr>]
Description This command is used to configure ARP spoofing prevention.
Parameters
gateway_ip <ipaddr> - The user can enter the Gateway IP address in here.
gateway_mac <macaddr> - The user can enter the Gateway MAC address in here.
<portlist> - The user can either specify the port(s) or select all ports.
Restrictions Only Administrator-level users can issue this command.
Example Usage:
To configure ARP spoofing prevention:
DES-1228/ME:4#config arp_spoofing_prevention add gateway_ip 10.90.90.1 gateway_m
ac 00-12-34-56-78-90 ports all
Command: config arp_spoofing_prevention add gateway_ip 10.90.90.1 gateway_mac 00
-12-34-56-78-90 ports all
Success.
DES-1228/ME:4#
show arp_spoofing_prevention
Purpose This command is used to display the ARP spoofing prevention configuration.
Syntax
show arp_spoofing_prevention
Description This command is used to display the ARP spoofing prevention configuration.
Parameters None.
Restrictions None.
Example Usage:
To display ARP spoofing prevention configuration:
DES-1228/ME:4#show arp_spoofing_prevention
Command: show arp_spoofing_prevention
Gateway IP Gateway MAC Ports
--------------- ----------------- ---------------------------