Specifications

DES-1228/ME Layer 2 Metro Ethernet Switch CLI Reference Manual
47
Example usage:
To delete a trusted host network with an IP address 10.62.0.0/16:
DES-1228/ME:4#delete trusted_host network 10.62.0.0/16
Command: delete trusted_host network 10.62.0.0/16
Success.
DES-1228/ME:4#
delete trusted_host all
Purpose
Used to delete all trusted host entries made using the create trusted_host ipaddr and
create trusted_host network commands above.
Syntax
delete trusted _host all
Description
This command is used to delete all trusted host entries made using the create
trusted_host ipaddr and create trusted_host network commands above.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To delete all trusted host entries:
DES-1228/MEG:4# delete trusted_host all
Command: delete trusted_host all
Success.
enable snmp traps
Purpose Used to enable SNMP trap support.
Syntax
enable snmp traps
Description
The enable snmp traps command is used to enable SNMP trap support on the Switch.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To enable SNMP trap support on the Switch:
DES-1228/ME:4#enable snmp traps
Command: enable snmp traps
Success.
DES-1228/ME:4#
enable snmp authenticate traps
Purpose Used to enable SNMP authentication trap support.
Syntax
enable snmp authenticate traps