User`s guide

Gigabit Ethernet Switch User’s Guide
104
The information is described as follows:
♦ Update Interval
Choose the desired setting:
1 second
,
5 seconds
,
15 seconds
,
30 seconds
,
60 seconds
or
Suspend
.
♦ 64
The total number of packets (including bad packets) received that were 64 octets in length
(excluding framing bits but including FCS octets).
♦ 65-127
The total number of packets (including bad packets) received that were between 65 and 127
octets in length inclusive (excluding framing bits but including FCS octets).
♦ 128–255
The total number of packets (including bad packets) received that were between 128 and
255 octets in length inclusive (excluding framing bits but including FCS octets).
♦ 256-511
The total number of packets (including bad packets) received that were between 256 and 511
octets in length inclusive (excluding framing bits but including FCS octets).
♦ 512-1023
The total number of packets (including bad packets) received that were between 512 and
1023 octets in length inclusive (excluding framing bits but including FCS octets).
♦ 1024-1518
The total number of packets (including bad packets) received that were between 1024 and
1518 octets in length inclusive (excluding framing bits but including FCS octets).
♦ RX (good)
The number of good frames received. This also includes local and dropped packets.
♦ TX (good)
The number of good frames sent from the respective port.
♦ Total RX
The number of frames received, good and bad.
♦ Unicast Rx/Tx
The total number of good packets that were received by and directed to a unicast
address. Note that this does not include dropped unicast packets
♦ Multicast Rx/Tx
The total number of good packets that were received by and directed to a multicast
address. Note that this number does not include packets directed to the broadcast address
♦ Broadcast Rx/Tx
The total number of good packets that were received by and directed to a
broadcast address. Note that this does not include multicast packets.