User`s guide

Gigabit Ethernet Switch User’s Guide
43
defined as static entries that may be added and removed from the Filtering Database by the user. They are
not automatically removed by any timeout mechanism.
To access the
Static Filtering Table
screen, select
Configure Filtering and Forwarding Table
from
the
System Configuration
menu. Then select
Configure MAC Address Filtering
from the bottom of
the
Configure Filtering and Forwarding Table
screen. The following screen appears:
Figure 6-20. Static Filtering Table screen
To make a change to the
Static Filtering Table
screen, choose
Add
or
Remove
in the Action field. Then enter
the MAC Address and VLAN ID number (if applicable) and press APPLY.
Configure Static Multicast Forwarding
The
Static Multicast Forwarding Table
screen allows you to forward traffic over each port for one
multicast group. To access this screen, select
Configure Static Multicast Forwarding
from the
Configure
Filtering and Forwarding Table
screen. The following screen will appear:
Figure 6-21. Static Multicast Forwarding Table screen (version one)
To make a change to the
Static Multicast Forwarding Table
screen above, choose
Add
or
Remove
in the
Action field. Then enter the MAC Address and VLAN. Next place a
V
over the dash “–“ in the Port field to