User`s guide

Gigabit Ethernet Switch User’s Guide
46
Figure 6-25. IEEE 802.1Q IGMP Configuration screen
This allows you to enable or disable these agents and set aging timers for them.
Items in the above screen are defined as follows:
♦ VLAN ID
This is the VID number for the VLAN that has an agent attached to it which enables IGMP
packets to be sent and received.
♦ Age-out Timer
If no IGMP query packet has arrived at the Switch before this timer has expired, the
Switch will become the IGMP host for this VLAN.
♦ IGMP Status
Activates or deactivates the agent on this VLAN.
Configure Port-based IGMP
If the Switch is in Port-based mode, the
IGMP Configuration
screen will offer a VLAN Settings section in
the lower part of the screen. Select
Configure Port-based IGMP
to access the following
Port-based IGMP
Configuration
screen:
Figure 6-26. Port-based IGMP Configuration screen