User`s guide

Gigabit Ethernet Switch User’s Guide
49
Figure 6-30. First Add/Remove MAC-based Broadcast Domain Members screen
To configure a broadcast domain, highlight the desired entry on the screen above and press <Enter>. The
following
Add/Remove MAC-based Broadcast Domain Members
screen appears:
Figure 6-31. Second Add/Remove MAC-based Broadcast Domain Members screen
The fields you can set are:
♦ Action
Select the desired action by toggling between
Add
and
Remove
.
♦ MAC Address
The MAC address of the broadcast domain member being added or removed.
Please note that the Status field for the MAC address you have entered may read
Not-Apply
. Once the Switch
is restarted in MAC-based broadcast domain mode, the MAC-addresses will be applied, meaning that the
broadcast domain is active.
Current Broadcast Domain, Number of members, MAC Address (in the lower part of the screen), and Status
reflect the current conditions. They are read-only fields and cannot be changed.