User`s guide

Gigabit Ethernet Switch User’s Guide
50
Configure Port-based VLANs
Choose
Configure Port-based VLANs
on the
VLAN Configuration
screen (
System Configuration !
Configure VLANs & MAC-based Broadcast Domains
) to access the
Port-based VLAN Configuration
menu pictured below (note that if you have just changed to this mode, you must also reboot the Switch before
being able to work with port-based VLANs):
Figure 6-32. Configure VLAN (Port-Based) menu
The field you can set is:
♦ Management Vid
Enter a VLAN name for use with in-band management.
Select
Add a Port-Based VLAN
from the menu above to access the following screen:
Figure 6-33. Create a Port-based VLAN screen
To create a port-based VLAN, fill in the VLAN Name field in the screen above. Next toggle
Yes
or
No
for each
port member. Press APPLY to let the changes take effect.