User`s guide

Gigabit Ethernet Switch User’s Guide
51
To edit or delete a port-based VLAN, select
Edit/Delete a Port-Based VLAN
from the
Configure VLAN
(Port-Based)
screen. The following screen appears:
Figure 6-34. first Edit/Delete a Port-based VLAN screen
Select
Edit
or
Delete
in the Action field and then select a VLAN from the column on the right side of the
screen above. The following screen appears:
Figure 6-35. second Edit/Delete a Port-based VLAN screen
Toggle between
Yes
or
No
to assign a port to be a member of the selected VLAN. Press APPLY to let the
changes take effect.
Configure 802.1Q VLAN
To configure an IEEE 802.1Q VLAN, you must do three things:
1.
Decide if you want to enable Ingress Filtering and enable it on the chosen ports. Ingress filtering applied
on a port causes the port to examine all incoming packets and check whether the port itself is a member of
the VLAN. This is normally used to keep untagged frames off the Switch, although it can have other uses
as well. This setting is configurable for each port in the
Ingress Filtering
screen.