User`s guide

Gigabit Ethernet Switch User’s Guide
53
and its own VIDs. If there is a match, the port will receive the packet. If the packet doesn’t have a VLAN tag
or the port is not a member of the VLAN for which the packet is tagged, the packet will be discarded.
Note:
If a port is a member of a trunk group but is not the anchor, the items shown in the above table
will be read-only and the values will be the same as those for the anchor port.
Choose
Configure Port VLAN ID
to access the second item on the
IEEE 802.1Q VLAN Configuration
menu. The following screen appears:
Figure 6-38. Port VLAN assignment screen
This screen allows you to set a default port VLAN ID number (PVID) for each port. Press APPLY to let the
changes take effect.
Note:
If a port is a member of a trunk group but is not the anchor, the items shown in the above table
will be read-only and the values will be the same as those for the anchor port.
Choose
Configure Static VLAN Entry
to access the third item on the
IEEE 802.1Q VLANs
Configuration
menu. The following screen appears:
Figure 6-39. 802.1Q Static VLAN Settings screen