User`s guide

Gigabit Ethernet Switch User’s Guide
59
Save Settings to TFTP Server
You can command the Switch to transmit a copy of its current configuration settings to any TFTP server on
the network. This is done by choosing
Save Settings to TFTP Server
from the
Utilities
menu. You will
first be asked if you want to save the current configuration (including any recent, possibly unsaved changes)
to the Switch’s non-volatile memory; then the following screen will appear:
Figure 6-47. Save Settings to TFTP Server screen
To upload the current configuration settings from the Switch to a TFTP server, enter the server’s IP address
and a suitable file name, then choose START. The result will be reported in the lower part of the screen.
Save Switch History to TFTP Server
The
Save Switch History to TFTP Server
function lets you command the Switch to send a record of
operational events (see
Switch History
under
Network Monitoring
, further on in this chapter) to any
TFTP server on the network. Choose this function to display the following screen:
Figure 6-48. Save Switch History to TFTP Server screen
To upload Switch history to a TFTP server, enter the server’s IP address and a suitable file name, then choose
START. The result will be reported in the lower part of the screen.