User`s guide

24-port NWay Ethernet Switch User’s Guide
62 Using the Console Interface
Figure 6-32. the second Add/Remove MAC-based Broadcast Domain Members screen
The fields you can set are:
♦ Action
Select the desired action by toggling between
Add
and
Remove
.
♦ MAC Address
The MAC address of the Broadcast Domain member being added or removed.
Please note that the Status field for the MAC address you have entered will read
Not Apply
if it is the same
MAC address entered in the filtering and forwarding table..
Current Broadcast Domain
,
Number of members
,
MAC Address
(in the lower part of the screen), and
Status
reflect the current conditions. They are read-only fields and cannot be changed.
Configure Port-based VLAN
If you are unsure of your knowledge of port-based VLANs, we highly recommend reviewing the
VLANs and
Broadcast Domains
section of the
“Switch Management Concepts”
chapter in this manual before proceeding.
To view the
VLANs & MAC-based Broadcast Domains Configuration
menu for Port-based VLANs:
1.
Choose
Configure VLANs & MAC-based Broadcast Domains
on the
Configuration
menu.
2.
Select
Port-Based VLANs
under Restart Mode and then press APPLY.
3.
Press RESTART on the
Change VLAN Mode
screen. This will cause the Switch to automatically save
changes and then perform a reboot.
4.
Repeat the first step. The following screen will appear: