Specifications

100
11
L AYER 2 FDB COMMANDS
The layer 2 forwarding database commands in the Command
Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command Parameters
create fdb <vlan_name>
<macaddr>
port <port>
create
multicast_fdb
<vlan_name>
<macaddr>
create fdbfilter <macaddr> [src/dst/either]
delete fdbfilter <macaddr>
config
multicast_fdb
<vlan_name>
<macaddr> [add/delete]
<portlist>
config fdb
aging_time
<sec>
delete fdb_static
delete
fdb_dynamic
vlan <vlan_name>
port <port>/all
mac <macaddr>
clear fdb_static [vlan <vlan_name>/port <port>/all]
show
multicast_fdb
vlan <vlan_name>
mac_address <macaddr>
show fdb port <port>
vlan <vlan_name>
mac_address <macaddr>
static
aging_time
vid
show fdbfilter <macaddr>
Each command is listed, in detail, in the following sections.