Specifications

106
config fdb aging_time
Purpose Used to configure the switch’s MAC address
aging time.
Syntax config fdb aging_time <sec>
Description This command is used to set the age-out
timer for the switch’s dynamic unicast MAC
address forwarding tables.
Parameters
aging_time <sec> − Specifies the time, in
seconds, that a dynamically learned MAC
address will remain in the switch’s MAC
address forwarding table, without being
accessed, before being dropped from the
database. The default value is 300 seconds.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To configure MAC address aging time:
DES7000:4@#config macentry unicast aging_time 300
Command: config macentry unicast aging_time 300
Success.
DES7000:4@#