Specifications

153
17
IGMP SNOOPING COMMANDS
The switch port commands in the Command Line Interface
(CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
config
igmp_snooping
<vlan_name>/all
host_timeout <sec>
router_timeout <sec>
leave_timer <sec>
robustness_variable <value>
last_member_query_interval <sec>
state [enabled/disabled]
config
igmp_snooping
querier
<vlan_name>/ all
query_interval <sec>
max_response_time <sec>
robustness_variable <value>
last_member_query_interval <sec>
state [enabled/disabled]
config
router_ports
<vlan_name> [add/delete]
<portlist>
enable igmp
snooping
forward_mcrouter_only/ disable
disable igmp
snooping
show igmp
snooping group
{vlan <vlan_name>}
show igmp
snooping
{vlan <vlan_name>/ detail}
show router ports vlan <vlan_name>
static/dynamic
Each command is listed, in detail, in the following sections.