Specifications

193
33 "Master port can't be half-duplex mode!”
34 "The EEPROM is full!”
35 "The VLAN has no router ports.”
36 "IGMP snooping is disabled in the
designated VLAN.”
37 "The username is invalid.”
38 "Incorrect password”
39 "The specified user already exists. Enter
a unique username.”
Add user
40 "The username does not exist. Enter the
name of an existing user”
Delete and Update
user.
41` "One active Admin user must exist!” Delete or Update user.
42 "Confirmation error! Passwords do not
match.”
Add or Update user.
43 "No more user accounts can be added! ” Add user.
44 "Please wait, loading factory
parameters.”
45 "You need to configure a port within the
range selected to view!”
46 "Invalid port settings!”
47 "The TFTP process was stopped!”
48 "Cannot upload log. The switch does not
have a history log!”
49 "The maximum number of spanning tree
group is twelve!”
50 “MAC address must be unicast!”
51 “MAC address must be multicast!”
52 "Forwarding/Filtering Table is full!”
53 "Multicast member must exist in the
VLAN.”
54 "The member port must exist in the
VLAN.”
55 "Duplicate route! Enter a unique route.”
56 "Target port can't be source port!”
57 "This port member can't be set.”
58 "Port members must belong to the same
VLAN.”
59 "The target port can't be selected as a
mirror port.”
60 "Invalid or undefined VID!”
61 "Specified vid is not in the static VLAN
table.”
62 "This is the DEFAULT_VLAN, it cannot
be removed.”
63 "This VLAN is used by routing interface,
it cannot be removed.”
64 "Invalid VLAN name.”
65 "The VLAN name you entered is
existing.”