Specifications

29
enable telnet
Purpose Used to enable communication with and
management of the switch using the
TELNET protocol.
Syntax enable telnet <tcp_port_number>
Description This command is used to enable the
TELNET protocol on the switch. The user
can specify the TCP or UDP port number
the switch will use to listen for TELNET
requests.
Parameters
<tcp_port_number> − the TCP port
number. TCP ports are numbered between
1 and 65535. The “well-known” TCP port
for the TELNET protocol is 23.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To enable TELNET and configure port number:
DES7100:4#enable telnet 23
Command: enable telnet 23
Success.
DES7100:4#