Specifications

enable web

Purpose Used to enable the HTTP-based

management software on the switch.

Syntax enable web <tcp_port_number>

Description This command is used to enable the Web-

based management software on the switch.

The user can specify the TCP port number

the switch will use to listen for TELNET

requests.

Parameters

<tcp_port_number> − the TCP port

number. TCP ports are numbered between

1 and 65535. The “well-known” port for the

Web-based management software is 80.

Restrictions Only administrator-level users can issue

this command.

Example Usage:

To enable HTTP and configure port number:

DES7100:4#enable web 80

Command: enable web 80

Success.

DES7100:4#