Specifications

35
reset
Purpose Used to reset the switch to the factory
default settings.
Syntax reset {all}
Description This command is used to restore the
switch’s configuration to the default
settings assinged from the factory.
Parameters all – If all is specified, all settings are
restored to factory default settings. The
reset all command will have the following
effects:
• Switch IP settings are set to
10.90.90.90/255.0.0.0
• User account information is deleted.
• Switch history logis deleted.
If all is not specified, the switch’s current IP
address and user accounts are ret
ained.
All other parameters are restored to their
factory default settings and the history log
is deleted
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To restore all of the switch’s parameters to their default values:
DES7000:4@#reset
Command: reset
Success.
DES7000:4@#