Specifications

42
6
SWITCH PORT COMMANDS
The switch port commands are listed (along with the
appropriate parameters) in the following table.
Command Parameters
config ports <portlist>
speed
[auto/10_half/10_full/100_half/100_full/
1000_half/1000_full]
flow_control [enabled/disabled]
learning [enabled/disabled]
state [enabled/disabled]
show ports <portlist>
config mgmt_port {speed [auto| 10_half| 10_full| 100_half
| 100_full] flow_control [enabled |
disabled]}
show mgmt_port
config
vdsl_port_loopback_test
<portlist> type [local/line] count <1-10>
show
vdsl_loopback_test
{[all | unit <int 2-13>]}
config vdsl_ports [ <portlist>/ all ] {line_speed
downstream
[Mode_0/512K/1M/2M/3M/4M/5M/8M/10
M/15M]
upstream
[Mode_0/512K/1M/2M/3M/4M/5M/8M/10
M/15M]
/learning [enabled / disabled]
/state [enabled / disabled]
/rate_adaptive_mode [disabled /
default / optimum]}
show vdsl_ports {<portlist>}
show vdsl_tx_power {<portlist>}