Specifications

45
show ports
Purpose Used to display the current configuration of
a range of ports.
Syntax show ports {<portlist>}
Description This command is used to display the
current configuration of a range of ports.
Parameters
portlist − specifies a range of ports to be
configured.
Restrictions None.
Example Usage:
To display the configuration of the ports 1-3 of module 1:
DES7000:4@#show ports 1:1-1:3
Port Port Settings Connection Address
State Speed/Duplex/FlowCtrl Speed/Duplex/FlowCtrl Learning
----- -------- --------------------- --------------------- --------
1:1 Enabled 1000M/Full/Disabled Link Down Enabled
1:2 Enabled 1000M/Full/Disabled Link Down Enabled
1:3 Enabled 1000M/Full/Disabled Link Down Enabled