Specifications

46
config mgmt_port
Purpose Used to configure the management port settings.
Syntax config mgmt_port speed
[auto/10_half/10_full/100_half/100_half]
flow_control [enable/disable]
Description Configure management port speed, duplex and
flow control.
Parameters
auto − enables auto-negotiation for the
specified range of ports.
[10/100] − configures the speed in Mbps of
management port.
[half/full] − configures the management port as
either full- or half-duplex.
flow_control [enable/disable] − enables or
disables flow control for management port
Restrictions Only administrator-level users can issue this
command.
Example Usage:
To configure the speed of the management port to be 100 Mbps,
full-duplex, flow control enabled:
DES7000:4@#config mgmt_port speed 100_full
flow_control enable
Command: config mgmt_port speed 100_full
flow_control enable
Success.