Specifications

53
Example Usage:
To enable all VDSL ports and configure them for a symmetrical
upstream and downstream data transmission rate of 1 Mbps,
with learning enabled
DES-7100:4#config vdsl_ports all line_speed downstream 1M
upstream 1M learning e
nabled state enabled
Command: config vdsl_ports all line_speed downstream 1M
upstream 1M learning ena
bled state enabled
Note! Just configure the exist port!!
Success.
DES-7100:4#
show vdsl_ports
Purpose Used to display the current status of VDSL
ports.
Syntax show vdsl_ports {portlist}
Description Use this to display current information on
VDSL ports switch wide or specify a list of
consecutive ports. Information displayed
includes port state, upstream and
downstream data transmission rates, link
status and learning status.
Parameters portlist – Ports may be specified following
the standard format, if no portlist is
specified all VDSL ports are displayed.
Restrictions This is for VDSL applications only. Requires
installation of DES-7010 Ethernet over
VDSL module.
Example Usage: