Specifications

58
7
NETWORK MANAGEMENT
The network management commands in the Command Line
Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command Parameters
create snmp community <community_string>
[readonly/readwrite]
delete snmp community <community_string>
create snmp
trap_receiver
<ipaddr>
<community_string>
delete snmp
trap_receiver
<ipaddr>
create trusted_host <ipaddr>
delete trusted_host <ipaddr>
config snmp community <community_string> [readonly /
readwrite]
config snmp
trap_reciever
<ipaddr>
<community_string>
config snmp
system_name
<sw_name>
config snmp
system_location
<sw_location>
config snmp
system_contact
<sw_contact>
enable snmp traps
disable snmp traps
enable snmp authenticate
traps
disable snmp
authenticate traps
enable rmon
disable rmon
show trusted_hosts <ipaddr>