Specifications

62
create snmp trap_receiver
Purpose Used to specify a management station, by
IP address and community string, that will
receive traps generated by the switch’s
SNMP agent.
Syntax create snmp trap_receiver <ipaddr>
<community_string>
Description This command is used to specify the IP
address of a management station that will
receive traps generated by the switch’s
SNMP agent and the community string that
will be used to authenticate the
management station’s privileges.
Parameters
<ipaddr> − the IP address of a
management station that will receive SNMP
traps generated by the switch’s SNMP
agent.
<community_string> − An alpha-numeric
string of up to 32 characters that will be
used to authenticate management stations
that want to receive SNMP traps from the
swtich’s SNMP agent.
Restrictions Only administrator-level users can issue
this command. A maximum of 4 trap
receivers can be specified.
Example Usage:
To create a trap receiver 10.1.1.1 in read-only level SNMP
community:
DES7000:4@#create snmp trap_receiver 10.1.1.1 System
Command: create snmp trap_receiver 10.1.1.1 System
Success.
DES7000:4@#